Product Info for UNIFYL B
UNIFYL B is a protein-type filler for use particularly on softer tannages including garment leathers. It imparts a soft fullness, good roundness, tight break, a soft silky feel, uniformity, good buffing properties and improved finishing. UNIFYL B can be used on straight chrome, vegetable or combination leathers, either full or corrected grains. As UNIFYL B is free from formaldehyde, it makes it suitable for automotive leather from wet-white as well as wet-blue. As this filler is in a dry powder form it has great economic advantage over liquid fillers from the standpoint of material cost, freight, storage, handling, etc. For maximum results, we suggest that UNIFYL B be added to the skins in the form of a slurry and run for 20 minutes before the addition of the fatliquor. UNIFYL B will give maximum filling in the loosest parts of the skin such as the belly area and flanks and will thus help to control the fatliquoring process ensuring a tight grain. It can also be added as a dry powder. The following would be a typical method of use:
Wash 15 mins. at 140°F (60°C). Drain and float skins to give approximately 150% water. Add: 2-4% UNIFYL B (as a slurry or as a dry powder). Run 20 minutes. Add: 6-10% FATLIQUOR. Run 30-40 minutes. Proceed as normal.
To make a slurry of UNIFYL B simply mix with hot water (130-150°F or 50-65°C.) If high speed mixing is available so much the better. However, in the absence of such equipment ensure a thorough mixing by whatever means are available.
|Product Class||Solids %||pH||Viscosity @25ºC||Gloss||VOC g/L||Tensile (D-882)||Elongation (%)||Modulus 100% (psi)||Sward Hardness|
3 Malcolm Hoyt Drive
Newburyport, Massachusetts 01950 · U.S.A.
Tel: (978) 465-1717 · Fax: (978) 465-4194
E-mail: email@example.com · www.unionspecialtiesinc.com
The information and data contained herein are believed to be correct. However, we do not warrant either expressly or by implication the accuracy thereof.