Product Info for UNISLIP FW
UNISLIP FW is a beige colored, non-hazardous powder used as an auxiliary in the tanning and or re-tanning process. It is composed of minerals and polymeric modifiers. UNISLIP FW helps to prevent tie-ups and tearing of leather in the wet stages. It also promotes better uniformity of tanning, re-tanning and dyeing. As UNISLIP FW is free from formaldehyde, it makes it suitable for automotive leather from wet-white as well as wet-blue. UNISLIP FW is used in the wet process by dissolving in water. It is difficult to give a set formula for the use of UNISLIP FW, but generally we recommend using 0.1 – 0.25% based on pelt weight. It should be added into the system after each wash cycle.
|Product Class||Solids %||pH||Viscosity @25ºC||Gloss||VOC g/L||Tensile (D-882)||Elongation (%)||Modulus 100% (psi)||Sward Hardness|
|Wet End||100||6.0 – 8.5 (5% solution)|
3 Malcolm Hoyt Drive
Newburyport, Massachusetts 01950 · U.S.A.
Tel: (978) 465-1717 · Fax: (978) 465-4194
E-mail: email@example.com · www.unionspecialtiesinc.com
The information and data contained herein are believed to be correct. However, we do not warrant either expressly or by implication the accuracy thereof.
[Please note that due to the Chinese Trademark Office opposition decision, products destined for the China marketplace in the category of “Adhesives for Industrial purposes: Polyurethane,” will NOT contain the trade name “UNITHANE” but will be labeled only with the letter or number designation. Please contact us if there are any questions. Thank you.]