Product Finder for Adhesives

Back to All Products

Product Info for LEVELER L-8

LEVELER L-8 is a leveling aid primarily develeped for waterborne coatings. It is used to reduce “fisheyes” and “crawling” when applying waterborne coatings to difficult substrates. It is compatible with most of the waterborne resins available today.

LEVELER L-8 can be used at levels from 0.1 to 1.0 parts per hundred based on wet resin weight.

LEVELER L-8 can be added just prior to use or can be added during the compounding of the coating resin.

PRODUCT MUST BE STIRRED THOROUGHLY BEFORE USING.

Industrial Applications:

This product is recommended for: Leather

Product Characteristics:

Product Class Solids % pH Viscosity @25ºC Gloss VOC g/L Tensile (D-882) Elongation (%) Modulus 100% (psi) Sward Hardness
Additives 38 – 45

Full product details can be found in this section:

GENERAL INFORMATION

TYPICAL SPECIFICATIONS

Total Solids %: 38 – 45
VOC (% of total weight): 0
Specific Gravity: 1.1-1.2
Appearance: Translucent
Freeze/Thaw Cycles (D-2243): 0
Shelf Life: Maximum 12 months
Mix Well Before Using
Harmonize Tariff Number: 3402.49.00 00

Certified to ISO-9001:2015

Contact Information:

3 Malcolm Hoyt Drive
Newburyport, Massachusetts 01950 ∙ U.S.A.
Tel: (978) 465-1717 ∙ Fax: (978) 465-4194
E-mail: union@unionspecialtiesinc.com ∙ www.unionspecialtiesinc.com

Disclaimer:

The information and data contained herein are believed to be correct. However, we do not warrant either expressly or by implication the accuracy thereof.

[Please note that due to the Chinese Trademark Office opposition decision, products destined for the China marketplace in the category of “Adhesives for Industrial purposes: Polyurethane,” will NOT contain the trade name “UNITHANE” but will be labeled only with the letter or number designation. Please contact us if there are any questions. Thank you.]