Product Info for UNISEAL 9049
Downloads
UNISEAL 9049 is a slightly cationic pre-bottom for corrected grain leathers to give uniformity and filling properties. Pigment can be added to UNISEAL 9049 up to 10% for added coverage. Recommended use is to spray and then plate the leather prior to finishing. Suggested application method is to dilute and apply by spray method as follows (* Due to the chemical nature of this product, we recommend that UNISEAL 9049 be mixed for 30 minutes under medium shear before using.):
Water 40
Penetrator 10
Uniseal 9049 50
Pigment 2 – 10
Industrial Applications:
Product Characteristics:
| Product Class | Solids % | pH | Viscosity @25ºC | Gloss | VOC g/L | Tensile (D-882) | Elongation (%) | Modulus 100% (psi) | Sward Hardness |
|---|---|---|---|---|---|---|---|---|---|
| Finishing, Oils and Waxes | 25 – 30 | 7.0 – 9.0 | 100-900 cps. |
GENERAL INFORMATION
TYPICAL SPECIFICATIONS
3 Malcolm Hoyt Drive
Newburyport, Massachusetts 01950 · U.S.A.
Tel: (978) 465-1717 · Fax: (978) 465-4194
E-mail: union@unionspecialtiesinc.com · www.unionspecialtiesinc.com
The information and data contained herein are believed to be correct. However, we do not warrant either expressly or by implication the accuracy thereof.
[Please note that due to the Chinese Trademark Office opposition decision, products destined for the China marketplace in the category of “Adhesives for Industrial purposes: Polyurethane,” will NOT contain the trade name “UNITHANE” but will be labeled only with the letter or number designation. Please contact us if there are any questions. Thank you.]