Product Info for UNIWAX JNW
UNIWAX JNW is an anionic, high solids, water based wax emulsion. When sprayed or roll coated on leather, UNIWAX JNW gives a frosty white appearance when plated at low temperatures. UNIWAX JNW can also be plated at higher temperatures to achieve a semi-aniline look.
UNIWAX JNW can be rolled on leather undiluted, but for spray applications, we recommend diluting it with water at a ratio of 80 parts UNIWAX JNW to 20 parts water.
Industrial Applications:
Product Characteristics:
| Product Class | Solids % | pH | Viscosity @25ºC | Gloss | VOC g/L | Tensile (D-882) | Elongation (%) | Modulus 100% (psi) | Sward Hardness |
|---|---|---|---|---|---|---|---|---|---|
| Oils and Waxes | 46 – 48 | 8.0 – 10.0 | 400 – 1000 cps. |
GENERAL INFORMATION
TYPICAL SPECIFICATIONS
3 Malcolm Hoyt Drive
Newburyport, Massachusetts 01950 · U.S.A.
Tel: (978) 465-1717 · Fax: (978) 465-4194
E-mail: union@unionspecialtiesinc.com · www.unionspecialtiesinc.com
The information and data contained herein are believed to be correct. However, we do not warrant either expressly or by implication the accuracy thereof.
[Please note that due to the Chinese Trademark Office opposition decision, products destined for the China marketplace in the category of “Adhesives for Industrial purposes: Polyurethane,” will NOT contain the trade name “UNITHANE” but will be labeled only with the letter or number designation. Please contact us if there are any questions. Thank you.]