Product Finder for Waterbased Dispersions

Back to All Products

Product Info for UNITHANE IC-204 NF

Unithane IC-204 NF is a NMP- Free, extremely hard, high gloss, APEO free, waterbased polyurethane dispersion; with exceptional chemical resistance properties. Suitable for use in a formulated topcoat for wood, metal, concrete, flooring, and selected plastics.

Industrial Applications:

This product is recommended for: Paint and Coating Resins, Graphic Arts

Product Characteristics:

Product Class Solids % pH Viscosity @25ºC Gloss VOC g/L Tensile (D-882) Elongation (%) Modulus 100% (psi) Sward Hardness
31 – 33 8.0 – 10.0 10-200 cps 80-100 83-88 7000 psi 60% n/a

Full product details can be found in this section:

GENERAL INFORMATION

Special Features: NMP-Free (NF), Low VOC (<100 g/L)
Application Types – Industrial Coatings: Interior, Exterior, Flooring, Wood, Concrete, Paint, Metal, Graphic Arts, OPV, Paper

TYPICAL SPECIFICATIONS

Total Solids %: 31 – 33
pH: 8.0 – 10.0
Viscosity @ 25⁰ C: 10-200 cps
VOC (Grams/Liter): 83-88
VOC (% of total weight): 8.3-8.8
Specific Gravity: 1.01-1.04
Appearance: Semi-translucent
Gloss (60): 80-100
Shelf Life: Maximum 12 months
Harmonize Tariff Number: 3909.50.6000

TYPICAL FILM PROPERTIES

Film Appearance after Curing: Clear
Tensile (D-882): 7000 psi
Tensile at 100% Elongation: n/a
Elongation (D-882): 60%
Cold Crank (ISO 17233): 5°C
Softening Point: 180°C
Pencil Hardness (D-3363): 6H
UV Resistance (D-4587): No Damage (1000 hours at 340 nm)
Impact Resistance (D-2794): Failed at 160 psi (Direct or Reverse)
Tabor Abrasion (D-4060): 35 mg loss (CS-10, 1000g 1000 cycles)
Mandrel Bend (D-522): Pass 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 1
Dry Time (D-5895): 40 minutes
Hydrolysis Resistance (200 hours, 70ºC, 95% RH): Retained 95% of Tensile Properties

CHEMICAL RESISTANCE TESTING (D-1308)

note: 5= no damage, films dried for 15 minutes at 80ºC, then equalized at room temp for 7 days.
Water: 5
Acetic Acid: 5
Ammonia: 5
Methyl Ethyl Ketone: 5
2-Propanol: 5
Toluene: 5
Gasoline: 5

VARIOUS SUBSTRATE CROSS CUT ADHESION (D-3359)

Cold Roll Steel – Unpolished: 5B
Aluminum – Untreated: 5B
Brass – Untreated: 5B
ABS – Untreated: 0B
Polycarbonate – Untreated: 0B
Nylon – Untreated: 0B
HDPE – Untreated: 0B

Certified to ISO-9001:2015

Contact Information:

3 Malcolm Hoyt Drive
Newburyport, Massachusetts 01950 ∙ U.S.A.
Tel: (978) 465-1717 ∙ Fax: (978) 465-4194
E-mail: union@unionspecialtiesinc.com ∙ www.unionspecialtiesinc.com

Disclaimer:

The information and data contained herein are believed to be correct. However, we do not warrant either expressly or by implication the accuracy thereof.