GENERAL INFORMATION
Special Features: NMP-Free (NF), Low VOC (<100 g/L)
Application Types – Industrial Coatings: Interior, Exterior, Automotive, Aircraft, Synthetic Leather, Concrete, Paint, Metal, Graphic Arts, OPV, Paper, Textiles, Plastics – Flexible, Plastics – Rigid, Adhesive/Primer, Heatseal, Blister Pack
TYPICAL SPECIFICATIONS
Total Solids %: 31 – 33
pH: 7.0 – 8.0
Viscosity @ 25⁰ C: 10 – 500 cps
VOC (Grams/Liter): 57
VOC (% of total weight): 5.7
Specific Gravity: 1.03
Appearance: Semi-Translucent
Gloss (60): 80 – 100
Freeze/Thaw Cycles (D-2243): 0
Shelf Life: Maximum 12 months
Harmonize Tariff Number: 3909.50.6000
TYPICAL FILM PROPERTIES
Film Appearance after Curing: Clear
Tensile (D-882): 3850 psi
Tensile at 100% Elongation: 600 psi
Elongation (D-882): 950%
Cold Crank (ISO 17233): below -30°C
Softening Point: 80°C
Pencil Hardness (D-3363): 7B
UV Resistance (D-4587): No Damage (1000 hours at 340 nm)
Impact Resistance (D-2794): No Damage at 160 psi (Direct or Reverse)
Tabor Abrasion (D-4060): 13 mg loss (CS-10, 1000g 1000 cycles)
Mandrel Bend (D-522): Pass 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 1
Dry Time (D-5895): 35 minutes
Hydrolysis Resistance (200 hours, 70ºC, 95% RH): Retained 85% of Tensile Properties
CHEMICAL RESISTANCE TESTING (D-1308)
note: 5= no damage, films dried for 15 minutes at 80ºC, then equalized at room temp for 7 days.
Water: 5
Acetic Acid: 3
Ammonia: 2
Methyl Ethyl Ketone: 1
2-Propanol: 2
Toluene: 4
Gasoline: 5
VARIOUS SUBSTRATE CROSS CUT ADHESION (D-3359)
Cold Roll Steel – Unpolished: 5B
Aluminum – Untreated: 5B
Brass – Untreated: 5B
ABS – Untreated: 5B
Polycarbonate – Untreated: 5B
Nylon – Untreated: 5B
HDPE – Untreated: 2B
Certified to ISO-9001:2015
Disclaimer:
The information and data contained herein are believed to be correct. However, we do not warrant either expressly or by implication the accuracy thereof.
