Product Finder for All Products

Back to All Products

Product Info for UNIWAX JNW

UNIWAX JNW is an anionic, high solids, water based wax emulsion. When sprayed or roll coated on leather, UNIWAX JNW gives a frosty white appearance when plated at low temperatures. UNIWAX JNW can also be plated at higher temperatures to achieve a semi-aniline look.

UNIWAX JNW can be rolled on leather undiluted, but for spray applications, we recommend diluting it with water at a ratio of 80 parts UNIWAX JNW to 20 parts water.

Industrial Applications:

This product is recommended for: Leather

Product Characteristics:

Product Class Solids % pH Viscosity @25ºC Gloss VOC g/L Tensile (D-882) Elongation (%) Modulus 100% (psi) Sward Hardness
Oils and Waxes 46 – 48 8.0 – 10.0 400 – 1000 cps.

Full product details can be found in this section:

GENERAL INFORMATION

Application Types – Leather: Upholstery, Shoe, Handbag

TYPICAL SPECIFICATIONS

Total Solids %: 46 – 48
pH: 8.0 – 10.0
Viscosity @ 25⁰ C: 400 – 1000 cps.
VOC (% of total weight): 5.40
Specific Gravity: 1.02
Appearance: Opaque
Freeze/Thaw Cycles (D-2243): 0
Shelf Life: Maximum 18 months.
Harmonize Tariff Number: 3405.10.0000

Certified to ISO-9001:2015

Contact Information:

3 Malcolm Hoyt Drive
Newburyport, Massachusetts 01950 · U.S.A.
Tel: (978) 465-1717 · Fax: (978) 465-4194
E-mail: union@unionspecialtiesinc.com · www.unionspecialtiesinc.com

Disclaimer:

The information and data contained herein are believed to be correct. However, we do not warrant either expressly or by implication the accuracy thereof.